Merge pull request #352 from hasecilu/master

New KP08, KFL08, SHF08 models

Electronics Parts/Motors/Stepper/README.md

@@ -10,7 +10,6 @@ Don't forget to share your modifications with the community.
 
 ![NEMA 17](NEMA/NEMA_17_with_connector.png)
 
-
 ### NEMA 23
 
 ![NEMA 23](NEMA/NEMA_23_with_connector.png)
@@ -18,3 +17,9 @@ Don't forget to share your modifications with the community.
 ## 28BYJ-48
 
 ![28BYJ-48](28BYJ-48/28BYJ-48.png)
+
+## EM-286
+
+The EM-286 Shimano STH-39H112-06 is a stepper motor recovered from old FX880, FX890, FX2180, and other EPSON matrix printers. Check the [Reverse Engineered Specification](https://ufj.ddns.net/blog/3d/2020/05/19/epson-stepper-em-286-sth-39h112-06-reverse-engineered-specs.html) made by Thiago Borges to see the specifications of this motor.
+
+![EM-286](EM-286/EM-286.png)

Mechanical Parts/Mountings/README.md

@@ -12,6 +12,13 @@ Gantry plate used as mounting place over a 2020 aluminum profile.
 
 ![Gantry_plate](Gantry_plate/Gantry_plate_20mm_v_slot.png)
 
+## Generic 2020 profile extrusion
+
+A simple generic 2020 V-slot Aluminium profile extrusion.
+
+You can find more profile extrusions in the `Mechanical Parts/Profiles EN` folder.
+
+![Aluminium extrusion](2020_V-slot_Al_extrusion/2020x50_V_slot_profile.png)
 
 ## Corner bracket
 
@@ -19,22 +26,18 @@ A simple corner bracket for joining 2020 profiles
 
 ![Corner bracket](Corner/2020_corner_bracket.png)
 
-
-## Generic 2020 profile extrusion
-
-A simple generic 2020 profile extrusion.
-
-You can find more profile extrusions in the `Mechanical Parts/Profiles EN` folder.
-
-![Extrusion](Extrusion/2020_V_Slot_profile.png)
-
-
-## SK08 Linear Shaft Support
+## Linear Shaft Support
 
 Precision stand up linear shaft support. Bore 8[mm].
 
+### SK08
+
 ![SK08](SK08/SK08.png)
 
+### SHF08
+
+![SHF08](SHF08/SHF08.png)
+
 ## Joining plates
 
 For joining 2020 profiles in 90 degrees with extra support
@@ -59,9 +62,18 @@ These bearing are usually used in assemblies with 2020 profiles. You can find mo
 
 ![SC8UU](SC8UU/SC8UU.png)
 
+## Pillow blocks
 
+These pillow blocks are usually used in assemblies with 2020 profiles.
+The very-detailed bearing model is a courtesy of [Jimmi Henry](https://grabcad.com/jimmi.henry-1), check it out at [grabcad](https://grabcad.com/library/608-skate-board-bearing-1).
 
+### KP08
+
+![KP08](KP08/KP08.png)
+
+### KFL08
+
+![KFL08](KFL08/KFL08.png)
 
-This model is licensed under CC-BY 3.0.
 
 Don´t forget to share your modifications with the community.