| .. | ||
| 3mm Pin Nock001 (Meshed).stl | ||
| 4mm Pole Nock and 3mm Pin Nock.FCStd | ||
| 4mm Poll Nock (Meshed).stl | ||
| Arrow Rest (Meshed).stl | ||
| arrow rest.FCStd | ||
| Arrow Rest.step | ||
| pocket text 30cm 2 sided Bow T Square-T Square.step | ||
| pocket text 30cm 2 sided Bow T Square.FCStd | ||
| README.md | ||
| T Square (Meshed).stl | ||
| T Square 30cm extension (Meshed).stl | ||
| T Square biscuit (Meshed).stl | ||
| T square string Clip (Meshed).stl | ||
FreeCAD Library Archery Equipment
4mm Pole Nock and 3mm Pin Nock.FCStd
Contains 2 Arrow nocks that may be printed in PLA.
arrow rest.FCStd
Contains an arrow rest that may be printed in TPU and attached around the bow's plunger with 2 sided tape.
pocket text 30cm 2 sided Bow T Square.FCStd
Contains an archery bow T square. The numeric scale may be printed in an alternate color by changing filament color one third through the print then changing back to the original color when the middle solid layers are complete. In the provided stl file, pause at layer 6 and change the filament, then pause at layer 10 and restore the original filament. If a T square longer than 24cm is needed print two biscuits and the 30 cm extension and glue the parts. Waning changing the scale factors in the slicer will result in an inaccurate T square.