128 lines
4 KiB
Markdown
128 lines
4 KiB
Markdown
# Mounting
|
||
|
||
In this folder you can find some parts used for assembling prototypes with 2020 profiles.
|
||
|
||
Check the images below to see if there is something of your interest.
|
||
|
||
Feel free to change it to your needs and share it with us. 😀
|
||
|
||
## Gantry plate
|
||
|
||
Gantry plate used as mounting place over a 2020 aluminum profile.
|
||
|
||
|
||
|
||
## Generic 2020 profile extrusion
|
||
|
||
A simple generic 2020 V-slot Aluminium profile extrusion.
|
||
|
||
You can find more specific profile extrusions in the `Mechanical Parts/Profiles EN` folder.
|
||
|
||
|
||
|
||
## Corner bracket
|
||
|
||
A simple corner bracket for joining 2020 profiles
|
||
|
||
|
||
|
||
## Linear Shaft Support
|
||
|
||
Precision stand up linear shaft support. Bore 8[mm].
|
||
|
||
### SK08, SKXX
|
||
|
||
Now with the 0.20 version is possible to use a `Configuration table` to create multiple variants of the same model. In the `SKXX.FCStd` file you will find the SK08, SK10, SK12, SK13, SK16, SK20, SK25, SK30, SK35, SK40, SK50, SK60 models (configurations). Learn more about the [Configuration tables here](https://wiki.freecadweb.org/Spreadsheet_Workbench#Configuration_tables). Also watch [this video](https://youtu.be/D0f7bkNGAOg) to learn how this model was made.
|
||
|
||
|
||
|
||
|
||
|
||
### SHF08
|
||
|
||
|
||
|
||
## Joining plates
|
||
|
||
For joining 2020 profiles in 90 degrees with extra support
|
||
|
||
### T shape
|
||
|
||
|
||
|
||
### L shape
|
||
|
||
|
||
|
||
## Bearings
|
||
|
||
These bearing are usually used in assemblies with 2020 profiles. You can find more specialized bearing in the `Mechanical Parts/Bearings` folder.
|
||
|
||
### LM8UU, LMXXXUU
|
||
|
||
Now with the 0.20 version is possible to use a `Configuration table` to create multiple variants of the same model. In the `LMXXXUU.FCStd` file you will find the LM6UU, LM6LUU, LM8SUU, LM8UU, LM8LUU, LM10UU, LM10LUU, LM12LUU, LM13LUU, LM16LUU, LM20LUU, LM25LUU, LM30LUU, LM35LUU, LM40LUU, LM50LUU and LM60LUU models (configurations). Learn more about the [Configuration tables here](https://wiki.freecadweb.org/Spreadsheet_Workbench#Configuration_tables).
|
||
|
||
|
||
|
||
|
||
|
||
### SC8UU
|
||
|
||
|
||
|
||
## Pillow blocks
|
||
|
||
These pillow blocks are usually used in assemblies with 2020 profiles.
|
||
The very-detailed bearing model is a courtesy of [Jimmi Henry](https://grabcad.com/jimmi.henry-1), check it out at [grabcad](https://grabcad.com/library/608-skate-board-bearing-1).
|
||
|
||
### KP08
|
||
|
||
|
||
|
||
### KFL08
|
||
|
||
|
||
|
||
|
||
## Leadscrews
|
||
|
||
Some leadscrew related parts.
|
||
|
||
### Tr8x8 leadscrew
|
||
|
||
* Thread: Tr8x8
|
||
* Starts: 4
|
||
* Lead: 8mm
|
||
|
||
The first 8 of Tr8 means it is to indicate the *diameter* (8mm) and the second 8 means the *lead*.
|
||
8mm lead means when drive by a stepper driver in *Full Step mode*, it moves 8mm per revolution.
|
||
|
||
|
||
|
||
|
||
### T8 housing bracket
|
||
|
||
|
||
|
||
|
||
### Nuts
|
||
|
||
#### Tr8x8 flange nut
|
||
|
||
**IMPORTANT! Don't open this file in FreeCAD Link Branch from realthunder because of [this bug](https://github.com/realthunder/FreeCAD_assembly3/issues/1120).**
|
||
|
||
|
||
|
||
#### Tr8x8 anti backlash nut
|
||
|
||
**IMPORTANT! Don't open this file in FreeCAD Link Branch from realthunder because of [this bug](https://github.com/realthunder/FreeCAD_assembly3/issues/1120).**
|
||
|
||
|
||
|
||
Don´t forget to share your modifications with the community.
|
||
|
||
## T-slot nut
|
||
|
||
In the `T_type_square_nut.FCStd` file you will find the 20S-M3, 20S-M4, 20S-M5, 20S-M6, 30S-M4, 30S-M5, 30S-M6, 30S-M8, 40S-M4, 40S-M5, 40S-M6, 40S-M8, 45S-M4, 45S-M5, 45S-M6, 45S-M8 and 45S-M10 models (configurations). Learn more about the [Configuration tables here](https://wiki.freecadweb.org/Spreadsheet_Workbench#Configuration_tables).
|
||
|
||
|