4.9 KiB
Mounting
In this folder you can find some parts used for assembling prototypes with 2020 profiles.
Check the images below to see if there is something of your interest.
Feel free to change it to your needs and share it with us. 😀
Gantry plate
Gantry plate used as mounting place over a 2020 aluminum profile.
Generic 2020 profile extrusion
A simple generic 2020 V-slot Aluminium profile extrusion.
You can find more specific profile extrusions in the Mechanical Parts/Profiles EN folder.
Corner bracket
A simple corner bracket for joining 2020 profiles.
Also there is a file with multiple variants available in a Configuration table. In Corner_bracket.FCStd you will find the 20x20, 28x28, 30x30, 40x40, 58x58 models.
Linear Shaft Support
Precision stand up linear shaft support. Bore 8[mm].
SK08, SKXX
Now with the 0.20 version is possible to use a Configuration table to create multiple variants of the same model. In the SKXX.FCStd file you will find the SK08, SK10, SK12, SK13, SK16, SK20, SK25, SK30, SK35, SK40, SK50, SK60 models (configurations). Learn more about the Configuration tables here. Also watch this video to learn how this model was made.
SHF08
Joining plates
For joining 2020 profiles in 90 degrees with extra support
T shape
L shape
Multiple variants
Inspired by Customizable Plate Bracket for Aluminium Extrusion Profiles by mightynozzle I decided to make some Configuration tables with various models, 6 types per shape.
Bearings
These bearing are usually used in assemblies with 2020 profiles. You can find more specialized bearing in the Mechanical Parts/Bearings folder.
LM8UU, LMXXXUU
Now with the 0.20 version is possible to use a Configuration table to create multiple variants of the same model. In the LMXXXUU.FCStd file you will find the LM6UU, LM6LUU, LM8SUU, LM8UU, LM8LUU, LM10UU, LM10LUU, LM12LUU, LM13LUU, LM16LUU, LM20LUU, LM25LUU, LM30LUU, LM35LUU, LM40LUU, LM50LUU and LM60LUU models (configurations). Learn more about the Configuration tables here.
SC8UU, SCXXXUU
Parametric design using a Configuration table to create multiple variants of the same model. Read about Configuration tables here.
Pillow blocks
These pillow blocks are usually used in assemblies with 2020 profiles. The very-detailed bearing model is a courtesy of Jimmi Henry, check it out at grabcad.
KP08
KFL08
Leadscrews
Some leadscrew related parts.
Tr8x8 leadscrew
- Thread: Tr8x8
- Starts: 4
- Lead: 8mm
The first 8 of Tr8 means it is to indicate the diameter (8mm) and the second 8 means the lead. 8mm lead means when drive by a stepper driver in Full Step mode, it moves 8mm per revolution.
T8 housing bracket
Nuts
Tr8x8 flange nut
IMPORTANT! Don't open this file in FreeCAD Link Branch from realthunder because of this bug.
Tr8x8 anti backlash nut
IMPORTANT! Don't open this file in FreeCAD Link Branch from realthunder because of this bug.
Don´t forget to share your modifications with the community.
T-slot nut
In the T_type_square_nut.FCStd file you will find the 20S-M3, 20S-M4, 20S-M5, 20S-M6, 30S-M4, 30S-M5, 30S-M6, 30S-M8, 40S-M4, 40S-M5, 40S-M6, 40S-M8, 45S-M4, 45S-M5, 45S-M6, 45S-M8 and 45S-M10 models (configurations). Learn more about the Configuration tables here.
This T-nut and other are now available in the Fasteners WB.
